FANDOM


The Heavy Aged SG Standard was a limited run Custom Shop model produced intermittently.

2014 Edit

14 hvy
  • $5,848 Street

Body:

  • Solid Honduran Mahogany body
  • Historic deep beveling
  • Tapered horn tips
  • One-piece construction
  • Nitrocellulose Lacquer finish

Neck:

  • 1-pc quartersawn Honduran Mahogany
  • Medium profile
  • Set-in construction
    • Hot hide glue
  • Joins body at 22nd fret
  • Indian Rosewood fretboard
    • Cellulose trapezoid inlays
    • 12" radius
  • Open Book headstock w/ Holly veneer
  • Inlaid Mother of Pearl Gibson logo
  • Inlaid Mother of Pearl Crown
  • 17headstock pitch
  • 22 frets
    • Leveled by Plek machine
  • 24 5/8" scale
  • Nylon nut
    • Cut by Plek machine
  • 1 11/16" nut width

Binding:

  • Single-ply, neck
14 hvy 2

Electronics:

  • Two Custombucker humbuckers
    • AlNiCo III magnets
    • ~8k Ohms DCR
    • Nickel plated covers
  • 3-way switch
  • 2 Vol, 2 Tone
    • CTS 500k pots

Hardware:

  • Nickel hardware
  • Kluson Deluxe Keystone tuning machines
    • 12:1 ratio
  • 5-ply "Angel Wing" pickguard
    • Wide bevel angle
  • Bell shaped truss rod cover
    • 2-ply, wide bevel angle
    • "Les Paul" engraving
  • Black Reflector knobs w/ pointers
  • ABR-1 Tune-O-Matic bridge
  • Aluminum stopbar tailpiece

Finishes:

  • T.V. Yellow

2017 Edit

17 hvy
  • $5,499-5,999 Street

Body:

  • Solid Honduran Mahogany body
  • Historic deep beveling
  • Tapered horn tips
  • One-piece construction
  • Nitrocellulose Lacquer finish

Neck:

  • 1-pc quartersawn Honduran Mahogany
  • Medium profile
  • Set-in construction
    • Hot hide glue
  • Joins body at 22nd fret
  • Indian Rosewood fretboard
    • Cellulose trapezoid inlays
    • 12" radius
  • Open Book headstock w/ Holly veneer
  • Inlaid Mother of Pearl Gibson logo
  • Inlaid Mother of Pearl Crown
  • 17headstock pitch
  • 22 frets
    • Leveled by Plek machine
  • 24 5/8" scale
  • Nylon nut
    • Cut by Plek machine
  • 1 11/16" nut width

Binding:

  • Single-ply, neck
  • Painted over sides
17 hvy 2

Electronics:

  • Two Custombucker humbuckers
    • AlNiCo III magnets
    • ~8k Ohms DCR
    • Nickel plated covers
  • 3-way switch
  • 2 Vol, 2 Tone
    • CTS 500k pots

Hardware:

  • Nickel hardware
  • Kluson Deluxe Keystone tuning machines
    • 12:1 ratio
  • 5-ply "Angel Wing" pickguard
    • Wide bevel angle
  • Bell shaped truss rod cover
    • 2-ply, wide bevel angle
    • Blank
  • Black Reflector knobs w/ pointers
  • ABR-1 Tune-O-Matic bridge
  • Aluminum stopbar tailpiece

Finishes:

  • Antique Pelham Blue

2018 Edit

18 sage 2
  • $4,999 Street

Body:

  • Solid Honduran Mahogany body
  • Historic deep beveling
  • Tapered horn tips
  • One-piece construction
  • Nitrocellulose Lacquer finish

Neck:

  • 1-pc quartersawn Honduran Mahogany
  • Medium profile
  • Set-in construction
    • Hot hide glue
  • Joins body at 22nd fret
  • Indian Rosewood fretboard
    • Cellulose trapezoid inlays
    • 12" radius
  • Open Book headstock w/ Holly veneer
  • Inlaid Mother of Pearl Gibson logo
  • Inlaid Mother of Pearl Crown
  • 17headstock pitch
  • 22 frets
    • Leveled by Plek machine
  • 24 5/8" scale
  • Nylon nut
    • Cut by Plek machine
  • 1 11/16" nut width

Binding:

  • Single-ply, neck
18 sage

Electronics:

  • Two uncovered Custombucker humbuckers
    • AlNiCo III magnets
    • ~8k Ohms DCR
    • Nickel plated covers included
  • 3-way switch
  • 2 Vol, 2 Tone
    • CTS 500k pots

Hardware:

  • Nickel hardware
  • Grover Rotomatic tuning machines
    • 14:1 ratio
  • 5-ply "Angel Wing" pickguard
    • Wide bevel angle
  • Bell shaped truss rod cover
    • 2-ply, wide bevel angle
    • "Les Paul" engraving
  • Black Reflector knobs w/ pointers
  • ABR-1 Tune-O-Matic bridge
  • Aluminum stopbar tailpiece

Finishes:

  • Sage