The SG Standard 24 first appeared as a 50th Anniversary model in 2011. It was later reintroduced in late 2014 as an exclusive model for retailer American Musical Supply.
2011 50th Anniversary[]
- $2,129 MSRP
- $1,389 Street
Body:
- Beveled, solid Honduran Mahogany body
- Grade A Mahogany (Translucent finishes)
- Deeper cutaway beveling than Standard
- Nitrocellulose Lacquer finish
Neck:
- 1-pc quartersawn Honduran Mahogany
- Set-in construction
- 5 degree angle
- Titebond glue
- Joins body at 19th fret
- Rounded '50s profile
- Rosewood fretboard
- Acrylic trapezoid inlays
- 12" radius
- Narrow Open Book headstock
- Resin impregnated fiberboard veneer
- Inlaid Mother of Pearl Gibson logo
- Silkscreened 50th Anniversary logo
- "Made in U.S.A." stamp
- 17o pitch
- 24 frets
- 24 9/16" scale
- Corian nut
- Cut by Plek machine
- 1 11/16" nut width
Binding:
- Neck, single-ply
- Thicker style
- Fret-edge binding
Electronics:
- Two '57 Classic Humbuckers
- AlNiCo II magnets
- ~7.9k Ohms D.C. resistance
- 3-way switch
- 2 Vol, 2 Tone
- CTS 300k volume, linear
- CTS 500k tone, audio
- "Quick-Connect" circuit board
Hardware:
- Chrome Hardware
- TonePros "Kluson Deluxe" tuning machines
- 15:1 ratio
- Green Keystone buttons
- 5-ply "Angel Wing" pickguard
- Bell shaped truss rod cover
- 2-ply b/w
- Black Reflector knobs
- Zamak Nashville Tune-O-Matic bridge
- Zamak stopbar tailpiece
Finishes:
- Antique Ebony
2014[]
Note #1: The pickguard on this model is not the typical "Batwing" shape, and was only ever used on this particular model. It is actually offset in shape.
Note #2: While the official specs claim the bridge pickup is a Tony Iommi Signature humbucker, at least some appear to have shipped with a '57 Classic. These still retain the solid chrome cover with no polepieces.
- $1,699 Street
- $1,549 Street (Price Drop)
- $1,499 Street (Price Drop #2)
- $1,399 Street (2016 Clearance)
Body:
- Beveled, solid Honduran Mahogany body
- Grade A Mahogany (Translucent finishes)
- Deeper cutaway beveling than Standard
- Nitrocellulose Lacquer finish
Neck:
- 1-pc quartersawn Honduran Mahogany
- Set-in construction
- 5 degree angle
- Titebond glue
- Joins body at 19th fret
- Rounded '50s profile
- Rosewood fretboard
- Acrylic trapezoid inlays
- 12" radius
- Narrow Open Book headstock
- Resin impregnated fiberboard veneer
- Inlaid Mother of Pearl Gibson logo
- Inlaid Mother of Pearl crown
- "Made in U.S.A." stamp
- 17o pitch
- 24 frets
- 24 9/16" scale
- Corian nut
- Cut by Plek machine
- 1 11/16" nut width
Binding:
- Neck, single-ply
- Thicker style
- Fret-edge binding
Electronics:
- One Firebird Humbucker (Neck)
- AlNiCo II magnets
- 17k Ohms D.C. resistance
- One Tony Iommi Humbucker (Bridge)
- AlNiCo II & Ceramic magnets
- 15.2k Ohms D.C. resistance
- One '57 classic Humbucker (Bridge, alternate)
- AlNiCo II magnets
- 7.5 - 8.3K Ohms D.C. resistance
- 3-way switch
- 2 Vol, 2 Tone
- Coil taps
- CTS 300k volume, linear
- CTS 500k tone, audio
- "Quick-Connect" circuit board
Hardware:
- Chrome Hardware
- TonePros "Kluson Deluxe" tuning machines
- 15:1 ratio
- Yellow Keystone buttons
- 5-ply "Batwing" style pickguard
- Different shape
- Bell shaped truss rod cover
- 2-ply b/w
- "SG" hot stamp
- Black Reflector knobs
- Zamak Nashville Tune-O-Matic bridge
- Zamak stopbar tailpiece
Finishes:
- Ebony
- Heritage Cherry