The SG Standard Korina was introduced as a 1993 limited run model, with a total production of 500 units (which was said to have not been reached due to supply constraints). That version was built by Gibson USA. In 2001, and again in 2009, it returned as a Custom Shop limited run.
1993[]
- $1,999 MSRP
- $1,199 Street Price
Body:
- Beveled Korina body
- "Pancake" construction w/ Redwood center strip
- Nitrocellulose Lacquer finish
- Amber-tinted clearcoat
Neck:
- 3-pc laminated Korina
- Set-in construction
- 3 degree angle
- Titebond glue
- Joins body at 19th fret
- Rounded '50s profile (.830" / .970")
- Indian Rosewood fretboard
- Trapezoid inlays
- 12" radius
- Narrow Open Book headstock
- Resin impregnated fiberboard veneer
- Inlaid Mother of Pearl Gibson logo
- Inlaid Mother of Pearl crown
- "Made in U.S.A." stamp
- 17o pitch
- 22 frets
- 24 9/16" scale
- 1 11/16" nut width
Binding:
- Neck, single-ply
- Thicker style
- Fret-edge binding
Electronics:
- 490R / 498T humbuckers
- AlNiCo II magnets
- 7.5-8k (neck) & 9-13k (bridge) Ohms D.C. resistance
- 3-way switch
- 2 Vol, 2 Tone
- CTS 300k volume, linear
- CTS 500k tone, audio
Hardware:
- Chrome Hardware
- Schaller "Gibson Deluxe" tuning machines
- 1:14 ratio
- Green Keystone buttons
- 5-ply "Batwing" pickguard
- Bell shaped truss rod cover
- 2-ply b/w
- "Limited Edition | X of 500" engraving
- Wide bevel angle
- Black Reflector knobs
- ABR-1 Tune-O-Matic bridge
- Schaller stopbar tailpiece
Finishes:
- Antique Natural
2001 Custom Shop[]
Despite being built in the Custom Shop, this model is not based on the Historic Standard, but rather the USA Standard, with the main differences from the USA model being the 1-pc body construction, thin, vintage-style neck binding, Holly headstock veneer and '57 Classics.
- Average weight: 7 lbs.
Body:
- Beveled, 1-pc Korina body
- Nitrocellulose Lacquer finish
- Amber-tinted clearcoat
Neck:
- 1-pc quartersawn Korina
- Set-in construction
- 3 degree angle
- Titebond glue
- Slightly larger heel
- Joins body at 19th fret
- Rounded '50s profile (0.85" / 0.97")
- Indian Rosewood fretboard
- Trapezoid inlays
- 12" radius
- Narrow Open Book headstock
- Holly veneer
- Inlaid Mother of Pearl Gibson logo
- Inlaid Mother of Pearl crown
- "Made in U.S.A." stamp
- Custom Shop decal
- 17o pitch
- 22 frets
- 24 9/16" scale
- 1 11/16" nut width
Binding:
- Neck, single-ply
- Thin, vintage-style
- Fret-edge binding
Electronics:
- Two '57 Classic Humbuckers
- AlNiCo II magnets
- ~7.9k Ohms D.C. resistance
- 3-way switch
- 2 Vol, 2 Tone
- CTS 300k volume, linear
- CTS 500k tone, audio
Hardware:
- Chrome or Gold hardware
- Grover Rotomatic tuning machines
- 1:14 ratio
- Manufactured by Ping
- 5-ply "Batwing" pickguard
- Bell shaped truss rod cover
- 2-ply b/w
- Black Reflector knobs
- ABR-1 Tune-O-Matic bridge and stopbar tailpiece
Finishes:
- Antique Natural
2008-2009 Historic Custom Shop[]
- $3,299 Street
- $2,999 Street (2011 price drop)
Body:
- Solid 2-pc Korina body
- Historic deep beveling
- Tapered horn tips
- Nitrocellulose Lacquer finish
- Aniline dye (Faded Cherry)
- Amber-tinted clearcoat
Neck:
- 1-pc quartersawn Korina
- 1960 Slim Taper C profile (.830"/.960")
- Set-in construction
- Joins body at 22nd fret
- Indian Rosewood fretboard
- Cellulose trapezoid inlays
- 12" radius
- Medium Open Book headstock w/ Holly veneer
- Inlaid Mother of Pearl Gibson logo
- Inlaid Mother of Pearl Crown
- 17o pitch
- 22 medium-jumbo frets
- Leveled by Plek machine
- 24 5/8" scale
- Nylon nut
- Cut by Plek machine
- 1 11/16" nut width
Binding:
- Single-ply, neck
- Thin, vintage style
- Fret-edge binding
Electronics:
- Burstbucker 1 & 2 Humbuckers
- AlNiCo II magnets
- 6.5k (neck) & 7.0k (bridge) Ohms DCR
- Nickel plated covers
- Switchcraft 3-way switch
- 2 Vol, 2 Tone
- CTS 500k vintage audio taper pots
- Mallory 150 "Bumblebee" caps
Hardware:
- Nickel hardware
- Gotoh SD90 Kluson-reissue tuning machines
- 1:15 ratio
- Green Keystone buttons
- Double line, single ring
- 5-ply "Angel Wing" pickguard
- Wide bevel angle
- Bell shaped truss rod cover
- 2-ply, wide bevel angle
- "Les Paul" engraving
- Black Reflector knobs w/ pointers
- ABR-1 Tune-O-Matic bridge
- Aluminum stopbar tailpiece
- Optional Maestro vibrola
Finishes:
- Faded Cherry
- Antique Pelham Blue
- Inverness Green
- Classic White
- Ebony